Avid Technology Stage 48 Dokumentacja Pobierz pdf (Strona 20)

Chapter 4: Configuring and Installing I/O in Stage 48 15

Installing I/O Cards in Stage 48

After you have removed Stage I/O cards from SC48, or if you

have purchased new compatible Stage I/O cards, you can in-

stall them in Stage 48.

Stage 48 has three slots that accept Stage I/O cards. I/O cards

are connected to pre-installed 50-pin ribbon cables located in-

side Stage 48.

It is recommended that you install cards in Stage 48 starting

with the top slot. If you are installing a combination of input

and output cards in one Stage 48, it is recommended that you

install input cards above output cards.

To install I/O cards in Stage 48:

1 Power down Stage 48.

2 Remove power and audio cables from Stage 48.

3 On the front panel of Stage 48, locate the slots which you

want to install I/O cards into, and remove the card slot covers.

4 Remove the ten back panel mounting screws.

5 Carefully pull the panel partially away from the rack, making

sure not to damage the fan cable attached to the back panel.

6 Disconnect the fan cable before removing the panel entirely.

Set the panel aside.

7 If you are installing output cards in Stage 48, do the follow-

ing before proceeding:

• Locate the included extenders.

• For each output card, use two extenders and two of the in-

cluded Phillips head screws to attach the extenders to the

back of the card. Orient the extenders so that the long

side of the extenders lay flat.

8 For each I/O card you are installing, hold the card by its

edges and gently slide the card into the slot.

Figure 15. An empty Stage 48’s I/O card slots

Do not remove the four fan mounting screws that are closest

to the fan port.

Figure 16. Stage 48 I/O back panel

I/O

card

slots

Mounting screws (remove all)

Fan mounting screws (do not remove)

Figure 17. Removing the back panel.

Disconnecting the fan cable

Figure 18. AO16 Output card with extenders

1 2 ... 15 16 17 18 19 20 21 22 23 24 25 ... 28 29

Komentarze do niniejszej Instrukcji

Brak uwag

Avid Technology Stage 48 Dokumentacja Strona 20

Komentarze do niniejszej Instrukcji

Powiązane produkty i podręczniki dla Ściemniacze Avid Technology Stage 48