Avid Technology SYNC HD Dokumentacja Strona 60
- Strona / 107
- Spis treści
- ROZWIĄZYWANIE PROBLEMÓW
- BOOKMARKI
Oceniono. / 5. Na podstawie oceny klientów
SYNC HD Guide56
MTC Output and Idle Muting
MTC is normally output whenever LTC is out-
put. Whenever LTC output stops, the SYNC pe-
ripheral will continue to output MTC in bursts
of one frame every 200 milliseconds. This allows
any connected MIDI-reading device to be con-
tinuously updated as to the position of VITC or
Bi-Phase (either of which might be operating at
slow or still speeds). Thus, you can still use a
connected MIDI device for Auto-Spotting from
VITC or Bi-Phase.
Optionally, this constant output can be set to
mute when timecode (LTC) is idle.
To mute idle-time MTC output using Pro Tools:
1 Choose Setup > Peripherals and click Synchro-
nization
.
2 Select the Idle MTC Enabled option.
3 Click OK.
To mute idle-time MTC output using the front panel
controls:
1 Press Set, and use the Up and Down switches to
display Idle MTC (“IdLE 7C”).
2 Press Set to display the current state (On or
Off).
3 Press the Up or Down switches to toggle the
Idle MTC setting.
4 Press Set.
To mute idle-time MTC output using the SYNC
Setup software utility (Windows only):
Select the Idle MTC Enabled option.
Generating a Window Dub
SYNC peripherals offer timecode character gen-
eration. This superimposes onto an SD video
signal a small area called a window dub (or win-
dow burn, or timecode window) that displays
timecode in hours:minutes:seconds:frames.
A window dub provides a visual cue to your lo-
cation in a project, and can be helpful when
spotting clips to video frames in Pro Tools, es-
pecially if your only timecode reference from
tape is LTC (Auto-Spot requires VITC).
The SYNC peripheral character generator ob-
tains its timecode address from the chosen Posi-
tional Reference.
Window Dub Requirements
Existing Video Signal
SYNC peripherals can only
insert a timecode window into an existing SD
video signal. This means that at least one video
source signal (from a VTR, nonlinear editing
system, or other video device) must be present
at one of the SYNC peripheral video input con-
nectors (Video In or Video Ref). When generat-
ing a window dub, the VITC Timing Rule applies
(see “VITC Timing Rule” on page 71.
SYNC Peripheral Output
The signal from the
SYNC peripheral Video Out connector must be
routed to a video destination such as another
VTR or nonlinear editing system.
- HD Guide 1
- Legal Notices 2
- Documentation Feedback 2
- Contents 3
- SYNC HD Guideiv 4
- Chapter 1: Introduction 5
- SYNC Peripheral Features 6
- System Requirements and 7
- Compatibility 7
- Registration 8
- About This Guide 8
- Conventions Used in This 9
- About www.avid.com 9
- SYNC HD Guide6 10
- Hardware Connections 11
- Clock for Pro Tools 12
- Audio Interfaces 12
- MachineControl 13
- Synchronization and 13
- Timecode Connections to 13
- Machines, Decks, and Other 13
- Connecting LTC 14
- Connecting Word Clock Devices 14
- Connecting AES/EBU Devices 15
- Connecting MIDI Timecode 15
- Software Installation 16
- Emulating a SYNC I/O 17
- Configuring a SYNC 18
- Peripheral from Pro Tools 18
- Clock Source 19
- Clock Reference 19
- SYNC HD Guide16 20
- Speed Cal 21
- SYNC Setup section 21
- Video Ref Format 22
- Video In Format Settings at 23
- HD Video Reference Rates 23
- Configuration 24
- Software Configuration for 24
- Troubleshooting 25
- Synchronization Accuracy 26
- Software 27
- Loop Master Indicator 28
- Sample Rate LEDs 28
- Generator/Parameter Controls 28
- Timecode Display 28
- Parameters and Values 29
- Remote Mode 29
- SYNC Peripheral Back Panel 30
- Host Serial Port 31
- Video In/Out 31
- LTC In/Out 31
- AES/EBU In/Out 31
- SYNC Setup Software Utility 32
- SYNC HD Guide30 34
- Bi-Phase/Tach Parameters 35
- Generator/Bi-Phase Preset 35
- Variable Speed Override (VSO) 35
- Override (VSO)” on page 42 35
- SYNC HD Guide32 36
- From Pro Tools 37
- (Windows Only) 37
- Utility, and the Front Panel 38
- Front Panel 39
- Generator/Parameter 39
- Switches 39
- Clock References and 40
- Video and Clock Reference 41
- Alignment 41
- Clock) Options 42
- LTC and Clock Reference 43
- Pilot Tone 44
- Bi-Phase/Tach and Clock 45
- Reference 45
- Positional Reference 47
- VITC and Positional Reference 48
- Auto LTC/VITC Positional 49
- Serial Timecode 50
- Bi-Phase/Tach 50
- SYNC HD Guide48 52
- Compensating for Timecode 53
- Timecode 53
- Generator Preset Mode 54
- LTC Generation/Regeneration 55
- VITC Generation/Regeneration 56
- Auto LTC/VITC 57
- External 57
- Internal VITC Generation 58
- MTC Generation/Regeneration 59
- Generating a Window Dub 60
- Edit Window 62
- Information 63
- Pull Rate 64
- Set Generator Start Time 64
- Digital Clock Reference 64
- Sample Rate 64
- Window Dub/Burn 66
- Freewheel Length/Duration 66
- LTC Output Level/Gain 66
- 0000 (LTC 0 - fastest) 67
- -0001 (LTC 1) 67
- -0002 (LTC 2 - average) 67
- -0003 (LTC 3) 67
- -0004 (LTC 4 - smoothest) 67
- Bi-Phase/Tach signal: 68
- To select a video system: 68
- HD Video Format 69
- MTC Idle Mute 69
- Device ID 69
- USD Compatibility Mode 69
- Using Fader Start 70
- Calibrating the SYNC 70
- Peripheral Oscillator 70
- Recalibrating 71
- Restoring Factory Settings 72
- Managing and Selecting 73
- Video Inputs 73
- SYNC HD Guide70 74
- LTC Signals 76
- Auto-Switch LTC/VITC 76
- Digital Clock Signal Types 77
- SYNC HD Guide76 80
- SYNC HD Guide78 82
- Rear Panel Connectors 84
- Assignments 89
- Bi-Phase/GPI/Pilot 90
- Bi-phase/Tach 91
- GPI Relay Outputs 92
- GPI (TTL)/MTC Outputs 93
- GPI (opto) Inputs 94
- Connector Pin Assignments 95
- SYNC HD Guide92 96
- SYNC Peripheral Cable Pin 97
- Bi-phase/Tach/GPI/Pilot Port 98
- Interfacing Notes 98
- Environmental Compliance 99
- EMC (Electromagnetic 100
- Compliance) 100
- Safety Compliance 101
- SYNC HD Guide98 102
- Index 99 103
- SYNC HD Guide100 104
- Index 101 105
- SYNC HD Guide102 106
- Technical Support (USA) 107
- Product Information 107
Powiązane produkty i podręczniki dla Generatory prądu Avid Technology SYNC HD
Gai-tronics 10959-201 and 10959-203 Wall-mount Audio Messenger manuales
Manuales del propietario y guías del usuario para Comunicación Gai-tronics 10959-201 and 10959-203 Wall-mount Audio Messenger.
Ofrecemos 1 manuales en pdf Gai-tronics 10959-201 and 10959-203 Wall-mount Audio Messenger para descargar gratis por tipos de documentos: Manual de usuario
Gai tronics 10959-201 and 10959-203 Wall-mount Audio Messenger Manual de usuario (23 paginas)
Marca: Gai-tronics | Categoria: Communication | Tamaño: 0.43 MB |
Más productos y manuales para Comunicación Gai-tronics
| Modelos | Tipo de documento |
|---|---|
| 12598-002 Redundant 5 V DC Module |
Manual de usuario
GAI-Tronics 12598-002 Redundant 5 V DC Module User Manual,
6 paginas
|
| 12594-001 Redundant AZI Switching Module |
Manual de usuario
GAI-Tronics 12594-001 Redundant AZI Switching Module User Manual,
7 paginas
|
| 12593-001 Redundant PPI Switching Module |
Manual de usuario
GAI-Tronics 12593-001 Redundant PPI Switching Module User Manual,
7 paginas
|
| 12599-002 Hot Standby Amplifier Module |
Manual de usuario
GAI-Tronics 12599-002 Hot Standby Amplifier Module User Manual,
17 paginas
|
| 234SBM Stanchion Broadcast Module |
Manual de usuario
GAI-Tronics 234SBM Stanchion Broadcast Module User Manual,
6 paginas
|
| 10458-101 600-Ohm / RF Electronics Paging Module |
Manual de usuario
GAI-Tronics 10458-101 600-Ohm / RF Electronics Paging Module User Manual,
31 paginas
|
| 7335-001 Page/Party Weatherproof Non-Metallic Mult |
Manual de usuario
GAI-Tronics 7335-001 Page/Party Weatherproof Non-Metallic Multi-Party Amplifier Enclosure (115 V AC) User Manual,
8 paginas
|
| 7335-001 Page/Party Weatherproof Non-Metallic Mult |
Manual de usuario
GAI-Tronics 7335-001 Page/Party Weatherproof Non-Metallic Multi-Party Amplifier Enclosure (115 V AC) User Manual,
3 paginas
|
| 7325-101 Page/Party Weatherproof Aluminum Multi-Pa |
Manual de usuario
GAI-Tronics 7325-101 Page/Party Weatherproof Aluminum Multi-Party Amplifier Enclosure (115 V AC) User Manual,
8 paginas
|
| ACC2500 Audio Control Center |
Manual de usuario
GAI-Tronics ACC2500 Audio Control Center User Manual,
56 paginas
|
| 701-304 Page/Party Handset / Speaker with Auxiliar |
Manual de usuario
GAI-Tronics 701-304 Page/Party Handset / Speaker with Auxiliary Jack (115 V AC) User Manual,
6 paginas
|
| 701-304 Page/Party Handset / Speaker with Auxiliar |
Manual de usuario
GAI-Tronics 701-304 Page/Party Handset / Speaker with Auxiliary Jack (115 V AC) User Manual,
2 paginas
|
| 701-307 Page/Party Handset / Speaker Amplifier (24 |
Manual de usuario
GAI-Tronics 701-307 Page/Party Handset / Speaker Amplifier (24 V DC) User Manual,
2 paginas
|
| 701-309 Page/Party Handset / Speaker Amplifier wit |
Manual de usuario
GAI-Tronics 701-309 Page/Party Handset / Speaker Amplifier with Auxiliary Jack (24 V DC) User Manual,
2 paginas
|
| 701-309 Page/Party Handset / Speaker Amplifier wit |
Manual de usuario
GAI-Tronics 701-309 Page/Party Handset / Speaker Amplifier with Auxiliary Jack (24 V DC) User Manual,
6 paginas
|
| 732-101 Page/Party Weatherproof Aluminum Single-Pa |
Manual de usuario
GAI-Tronics 732-101 Page/Party Weatherproof Aluminum Single-Party Amplifier Enclosure (115 V AC) User Manual,
8 paginas
|
| 733-001 Page/Party Weatherproof Non-Metallic Singl |
Manual de usuario
GAI-Tronics 733-001 Page/Party Weatherproof Non-Metallic Single-Party Amplifier Enclosure (115 V AC) User Manual,
9 paginas
|
| ICS Page/Party Flush-mount Subset |
Manual de usuario
GAI-Tronics ICS Page/Party Flush-mount Subset User Manual,
6 paginas
|
| ICS Page/Party Flush-mount Subset |
Manual de usuario
GAI-Tronics ICS Page/Party Flush-mount Subset User Manual,
3 paginas
|
| ICS Page/Party Desk-edge Subset |
Manual de usuario
GAI-Tronics ICS Page/Party Desk-edge Subset User Manual,
5 paginas
|
© 2020, manymanuals.pl. Wszelkie prawa zastrzeżone. | 0.027 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Komentarze do niniejszej Instrukcji